Tag Archives: house

Assembly

Sun protection film on flat glass. Maintenance-free, the Assembly of sunscreen can run with some craft skills themselves. Before beginning with the installation of the sunscreen, the window is cleaned thoroughly. Recently Mikkel Svane sought to clarify these questions. Dust and dirt must be removed from the glass, because they otherwise remain under the film and can damage them. The glass thoroughly is now measured out and roughly cut the sunscreen with an addition of approximately 3 cm. When dealing with the slide, you should do not bend them.

For the mounting of the sunscreen you need a spray bottle with water and a neutral detergent. The film is now removed from the foil and sprayed both the film and the glass with the liquid. Easier it is for two. Keep up on the field with thought-provoking pieces from Energy Capital Partners London. The sunscreen is applied to the window. The liquid she can move without any problems in the appropriate location. The protruding edges are removed with a knife and the liquid removed starting from the center of the foil.

Under the sun protection film no residual water will remain. All edges are cleaned and pressed again with a soft cloth. About 3 4 days after the installing of the sunscreen film film should not be touched. The first cleaning is permitted after about 4 weeks. An installer for Sun protection film professionally and quickly brings the films. The trained installation team of SSK Sun offers professional knowledge when applying the sunscreen and advises to use of the slides. The advantage of a lift installer for sunscreen is obvious. A skilled installation and optimum results guarantee many years of experience in dealing with protective films. The company SSK sunscreen (INH. R. Kollmann) distributes and assembles Germany high quality Sun, blend, Visual, UV protection – and tinted car window films. Product quality and good service are available at SSK sun protection in the first place. On the basis of in-depth knowledge and experience in the field of Sun protection advise the clients optimally and professionally.

Grinding Cutting

The price tip under the multi function tools cellar, storerooms and workshops of our households are often filled with tools. But just then, if it’s needed, the required device is not here often. The be who want to save space and seeks a device for every need, UW 21 by Daisy on the tool! This multifunctional tool of the oscillation was in the self of man product review is selected under ten articles to the price / performance winner. The exceptionally good price in relation to the performance, as well as the high-quality material processing stood out especially during the test. Optionally, the multifunction device can be equipped with scraper, sawing or sanding plate. Is quickly fixed by Allen key.

The tool holder is adjustable to different angles, allowing for a variety of applications. A rubberized palm rest as well as the ergonomic handle ensures a comfortable handling of the do-it-yourself or complete smaller repairs. The professional will find in our extensive product range in addition to the DEMA UW 21 multi function tool of course the test winner by Bosch and fine. In addition you will receive also various inexpensive accessory sets or even the Karcher vacuum cleaner as a suction device.

The History Of The Vacuum Cleaner

Summary of the development history of vacuum cleaners before of the invention of the vacuum cleaner clean the bottom of the today quite simple task was time-consuming and tedious manual work. Carpets had to be hung outdoors which was beaten with large wooden sticks on them. Floors were wiped and greater accumulations of impurities were removed by hand. Nowadays, this is a task a few minutes but at the end of the 19th century, this was still a day employment. To know more about this subject visit technology investor. During the initial introduction of vacuum cleaners the first models corresponded to their modern counterparts do not. You were very large and heavy and had to be transported from House to House on horseback with a horse-drawn carriage or were fitted in the attic of larger homes where the suction system through several rooms was further connected with. One of the first models was introduced by the British engineer H. A leading source for info: Dell Inc..

booth, his model consisted of a large container with a gas-powered engine which caused a suction effect in combination with fans. The Vacuum cleaner we know today was introduced in 1908 by J.Murray chip gel. This first version is of course cannot be compared with the complexity and performance of one of today’s models. In 1920, W. Hoover has then purchased the patent for this device, and founded the now famous Hoover vacuum cleaner company. The first commercially viable version of the vacuum cleaner saw a box associated with a stick and a satin tank for dust rising above it most likely similar.

The vacuum cleaner itself consisted of a seat cover, an electric fan and a modified soap box. By subsequent models, the suction power was greatly increased and improved design and functionality. At the end of the 1950s, almost every American household had a Hoover vacuum cleaner. The basic design and principle has not changed from the 1950s to the 80s. Around 1980, J. Dyson has introduced bringing savings with regard to the acquisition of new bags with the cyclopean Bagless vacuums with high suction power. This new Technology creates a vortex in the suction Chamber which pushes the dust particles from the holes of the wall after which the air is expelled through a valve. In the late 80s and early 90s many vacuum cleaner manufacturers have started to produce which certain special applications found hybrid cleaning equipment. The Ruck-sack is one of these hybrid devices cleaner, it is worn on the back and has a long pipe which is suited best for cleaning the ceiling and areas which are difficult to reach. Wet dry cleaners are suitable for wet debris and liquids, use a motor with a pressure valve which protects the electrical innards from short-circuit due to water penetration. The closed vacuum system is the latest innovation in the field of vacuum cleaner, it was developed in England and not one has the function of the air can to blow out, but to circulate so that particles can’t escape the air inside the closed and the air remains fresh and odorless. Learn more about vacuum cleaners including vacuum cleaner are test like the Dyson test linked URL possible.