Digital Armor

If the external stability, it is mobile and does not crack. Also note that selecting a material for walls, should evaluate the functionality of the premises and the presence of domestic animals. Certain types of decorative plasters can be washed. More info: isearch. And if your house a pet, be sure that the new walls were not to his teeth. In this case, you may, and does fit facade coating that will not necessarily be rough and can not give grace to less "Tsarapoustoychivomu." Merits and what lies behind it.

All manufacturers on the left and the right to shout about the benefits of decorative plasters over other coatings. Yes, in many respects they are right, there are a number of amendments: Does not require careful preparation of the surface – indeed, finish puttying is not required, but large defects it is better to remove that coating formed a uniform layer, without dark spots; Perfect camouflage imperfections – not always true, as for smooth surfaces must be perfectly smooth surface; Apply to virtually any surface – be aware of the effect of swelling of such foundations such as wood, drywall, fiberboard therefore not recommend using them on a water-based coatings; Forming a seamless coverage – is absolutely true, but must be applied professionally (the main focus on the consumption of material specified in the instructions), more subtle and thicker than expected, the same ugly look as a result; Easy to use – yes, if correctly chosen (see above about the facades and interiors), have excellent resistance to any mechanical influences – rightly, since the material is very durable. It is true the word "Any" is still clean – there are also effects ogogo (bomb, for example, nuclear). Oh, and there is bad news. Cover, unfortunately, can not be repaired in fragments – a patch immediately becomes visible; Withstands temperatures from -50 to +75 degrees – believe it, but should be applied at a temperature of -5 to +30; Do not support combustion, explosion and fire – of course, but coatings based on solvent at a temperature of 140 degrees, release toxic substances (well, that such situations do not happen every day); Varied the number of decorative effects and color variations – certainly compared with them can only decorative paints.

Tags: construction of life, Technology Repair

What is an additive in concrete? Additives in concrete mixtures – are organic or inorganic substances which when added to concrete can adjust its properties. Supplementation can significantly reduce costs while construction. Additives in the concrete mixture is allowed to modify the qualitative and functional characteristics of the concrete. A little history Since ancient times people used in the construction of binders. In Ancient Greece to decorate and protect the houses are often used mortar with the addition of volcanic ash produced on the island of Santorini. In ancient China, as used in this rice paste or syrup. Used in Russia lime mortars for masonry and plaster walls. And then there are the first "supplements".

To increase the stability of solutions they added an egg white, milk or linseed oil. Later with the development of science and industry to regulation of setting time of plaster began to use an additive. In the 20 years of the twentieth century began the active use of calcium chloride as an accelerator, and sugar, as the moderator. Top of the use of plasticizers can be attributed to the 30s, and air-supplements – to 50-th year. Classification of concrete admixtures All additives in concrete mixtures are classified according to GOST 24211-91. Grouts are divided into four main groups: 1. Regulatory properties of concrete mixtures: – Group I plasticizers (superplasticizers), plasticizers group II (cilnoplastifitsiruyuschie), plasticizers Group III (sredneplastifitsiruyuschie), plasticizers Group IV (Slaboplastifitsiruyuschie) – stabilizing – water-retaining – improving perekachivaemost – regulating the keeping of concrete mixtures – delaying setting – setting the accelerating – porizuyuschie (for lightweight concrete): air-entraining, foaming, blowing.

2. Regulatory hardening concrete: – slow down hardening – hardening accelerating. 3. Increase the strength and (or) corrosion resistance, frost resistance of concrete and reinforced concrete, reduce the permeability of concrete: – vodoredutsiruyuschie I, II, III and IV – kolmatiruyuschie – blowing – air-entraining – enhancing the protective properties of concrete in relation to steel reinforcement (steel corrosion inhibitors). 4. Giving a concrete special properties: – antifreeze (provide curing at low temperatures) – hydrophobic I, II and III.

Tags: construction of life, Technology Repair

Are you tired of your old, cracked walls, which did not fix any wallpaper or paint? Do you want to drastically change the look of the apartment, but major repairs have no money? One of the best ways out of this situation – to sheathe the walls plasterboard. Drywall – environmentally friendly construction supplies made, as the name implies, made from plaster and cardboard. So everything is very simple: first, do framing, which then attached sheets. Let us technology in detail. To begin, select metal profiles, which will be used to build load-bearing frame. Selecting a profile for the premises, the height and thickness of the walls.

To locate the mounting drill with a drill, selected by diameter dowel, hammer, screwdriver, putty knife, carpenter's knife, scissors for cutting metal and profile cutter for cutting the drywall. Still need: pencil, level, and of course the meter. Proceed. Take rate or plumb line and make the floor and the ceiling layout, which determines the distance from the wall to-date profile of the attachment. Using a meter on it draw a line on which the profile will be attached. Attach the rubber stripes on the "sole" rack and guide profiles. Install and tighten the profile along the lines of markup.

To do this, drill the holes for the dowels through the holes in the ceiling and the floor. This can be done well directly through the wall profiles in the right places. Vertical profile attached to the ceiling and floor guide profile self-tapping screws or brackets and the wall – plugs driven into a 600-1000 mm. Remember correct fastening – pledge a flat surface of the walls. In the case of cold or damp home place between the rack frame profiles of mineral-fiber panels. After installing and fitting all profiles frame make Communications wiring (wiring, pipes, etc.). Now it's time to get down to the fastening panels using screws and screwdriver. Tightly attracted to the shelf panel screws form a rigid profile kostruktsiyu. Plasterboard fixed vertically. The edges of the panels must be flat and fitted in size. To cut the edges of the sheet used hacksaw, carpenter's knife or electrofret. Flat edge of the drywall are using marginal planing. After preliminary training antics on the floor, you are ready to mount on the frame. At intervals of 200-250 mm, attach the plate to the profile of screws. Potschatelnee Customize each other edge, keep in mind that will depend on the general form of the wall. If you need to leave space for an opening (window or door), it is necessary to fix the profiles in terms of its edge and screw cut exactly along the edge of a sheet of drywall. Without much effort, for a couple of days you can quite cope with the large spaces are fairly easy coping with various irregularities and cracks in the walls. After making repairs through drywall you will see that the warmth and comfort will not leave your house.

Tags: construction of life, Technology Repair

Site preparation prior to building. Preparatory work before the built-up area. Do you have a desire plot, a plot of land and funds for construction. Isearch is full of insight into the issues. Then proceed. First, you need to know what kind of house you want and do or by the designer to draw a house and set the dimensions of every detail in the flesh to the size of the steps on the porch (if you are planning out). Further possible to calculate precisely the cost of building materials and payment the work that you can not or do not want to do. To this value add another 25% it will cost you a rough construction costs. After this first work to be done before proceeding to the base unit, is to prepare the site.

Need to get rid of rubbish stored on your site. For assistance, try visiting isearch. Pick up trash in one pile by hand (using a special tool or Off-Highway Applications), or polypropylene bags bring up the machine for garbage collection. After all the garbage is removed from the yard must be pre-drawn house plan to transfer land to remove the topsoil from the land location foundation and move it into the garden. The next step in the approach of your dreams in a beautiful home is in the lining of the site. It should get rid of hills, dips, if any, and other irregularities hinder the implementation of zadumnnogo.

Once done all the preparatory work should take delivery of the material for the construction of foundations, think about storage. You should not take more than you calculates to develop in the near future. Striotelny material tends to deteriorate rapidly. So take care of the storage conditions of that purchase and zavezete on the subject. Solutions must be stored under cover to few inches above the ground. Construction site VedBud

Tags: construction of life, Technology Repair

When remodeling an apartment on the first question on the construction of new partitions. The best option here is the easy device of drywall partitions. The basis of the wall is frame made of metal or wooden beam profile, which is lined with gypsum sheets (FCL). The space between is filled with sound-absorbing material of GCR. The designs of the wooden frame consists of upper and lower trim, which is mounted between vertical supports. Between racks have cross bars that give the frame more rigid. They have either the same level, or stepped (For example, to mount paintings, lamps, etc.).

Door unit is located flush with the inner or outer surfaces of the structure. If the room has no windows, then arranged in the partition above the door or additional window, make the room brighter. The work should be performed as follows. Initially produce a measurement of space and layout. Careful planning and precise measurement of space largely determines the success of the work. The partition can be mounted "place" or "on the floor." All Ads YandeksDirekt Advertise Tension ceilings by proizvoditelyRossiya-Germany-France (seamless). 3 days! Cheaper is not found !!!!! marti-com.ru Moscow and Moscow region Making frame walls "in place" preferably in cases where the room has sloping walls, if you want to partition the corner, the shortage of space for pre-assembly frame on the floor. Alignment construction details, checking angles, some clarification of the size needed to constantly in the process of partitioning device.

The only way to accurately and precisely adjust to each other and details nodes of the framework. At first floor bar is attached to the waist, which should adhere to the plinth. If the construction of walls will be angled, set rack adjacent to the walls. After this, measure the distance to future construction of the angle to determine the length of the bars of the waist.

Tags: construction of life, Technology Repair