Diesel Power System MAZDA 626 85-91 years of release in this article we will look at a diesel power system, the work of the injection system, as well as removal and installation of fuel filter on MAZDA 626 85-91 years of release in our scheme installed a diesel power system based on the fuel injection pump VE BOSH company but made in Japan. With all the repair work on injection system – no matter to what extent – it is necessary to observe the strictest purity, Therefore, we must especially observe the following: All work on the installation of injection should be performed in a clean environment. Operation in air must be carried out only in windless days to avoid getting dust All connections to coupling nuts before unscrewing wipe with a rag. All Removable parts spread out on a clean bench or other such place and cover with paper or foil. If this has piqued your curiosity, check out Michael Dell. But no use wet cloths cover. All open or partially disassembled parts injection system should be properly covered or stored in a closed box, if the repairs will be carried out later. Before installing all the details test for perfect purity, If the unit is open, you can not use compressed air to blow any engine parts car, if possible, not moving, if withdrawn details the installation of injection * Monitor topics. to diesel fuel but it could get to the radiator hoses. If this happens, they need to immediately clean contaminated with diesel fuel and thus damaged tubes should always be replaced.
With the arrival of the drop of temperatures typical of these dates, the roads become particularly dangerous. To reduce the risk to a minimum, it is necessary to make a tuning of cars, paying special attention to the car battery, tires, oil, wiper blades, headlights, brakes two of the most important changes that should be made to they are the oil change and change of tires. With respect to the driving, some guidelines should be followed to not put ourselves in danger nor endanger other drivers, how to increase the distance to the vehicle that precedes us, use hot air for defogging crystals and thus improve visibility, use your fog lights, reduce the speed change oil car. Car oil has three main functions. The first is the lubricate the engine to do that decreases the friction between the parts that compose it. The second is to make the temperature caused by combustion to drop and the third is to keep it clean.
The oil might be mineral, synthetic and semi-synthetic, and you have to pick one quality that is equal to or higher than indicated by the manufacturer. Of course, always the manufacturer’s instructions be followed to change it. Changing tires. Snow, ice, rain or cold temperatures cause a tightening of conventional tires and do to diminish its elasticity. Why, on these dates, it is recommended to replace them with winter tyres.