before thermal diffusion processing piles are cleaned ready for blast machine, this process not only cleans the surface of the finished pile from any pollution – but also completely clean welds on the scale that allows galvanized joints with the same level of quality – the rest of the surface; Description Screw pile screw piles – steel pipe is welded to the blade at her specific configuration. Screw piles have been developed by the military for use as bridge supports, high-voltage lines, the weak and the frozen ground. With the use of modern technology NeoZinc screw piles have become more attractive than the foundations for a device primarily in low-rise suburban buildings. High load carrying capacity of screw piles is simple: when screwing interturn intervals of the soil is not loosened, and, conversely, are sealed blade screw piles. The piles are made in accordance with the requirements applicable to this kind of high-quality designs that meet state standards and are capable of withstand compression as well as pull loads of up to 7 tons – each. According to calculations the estimated unit cost vintovgogo base by 35-40% cheaper than any tape, even malozaglublennogo foundation. In addition to the cost of a still a lot of advantages in favor of screw bases, which are described in detail in the section Advantages of screw base (foundation on screw piles) The protective coating of our screw piles made by thermodiffusion galvanizing technology and complies with GOST NeoZinc 9.316-2006. Standard coating thickness of 50 microns – that ensures the safety of the pile for at least 50 years.