Finish Coating
Nov 9
2011
Often you can see, as recently nastelenny floor, quickly loses its properties, carpet torn, rubbed linoleum, wood creaking, etc. This is especially seen in public places. Why is this happening? After Manufacturers of coatings, be it vinyl, laminate, or carpet, give guarantees not less than 10 years. It turns out the correct choice of coating is not everything. Of course, if you bed in public office or shop coating applicable only to residential buildings, designed for low load, the main reason for its rapid amortization will be the discrepancy methods of operation. But when the coating is chosen correctly, in accordance with loads on the floor, the main role in life is to play the correct installation and training grounds.
What is included in the concept of 'gender training'. Isearch: the source for more info. What procedures must be done before finish. First, Use the primer, it will increase adhesion and reduce the subsequent withdrawal of water from the alignment layer. Sometimes, in addition to reducing the absorption of the base, the primer used to create a hard floor, especially in environments with high load, such as in warehouses. Second, the laying of alignment layer, which allows for absolutely smooth base.
Leveling the masses come in many forms, you must pick them up, Again, according to the load, the importance of their property – spreadability. The third phase – selection and application of the adhesive, which will be attached directly to surface finish. Clay chosen on the basis of the choice of covering, and their divided into two main types: adhesive for wood coatings and adhesives for flexible coverings (linoleum, carpet, etc.). Clay is a very important part of the venture with perestilom floor, we recommend not to save it. Consider the temperature in the room often the glue can not withstand cold weather, so you should pick up frost glue.
0 comments