When remodeling an apartment on the first question on the construction of new partitions. The best option here is the easy device of drywall partitions. The basis of the wall is frame made of metal or wooden beam profile, which is lined with gypsum sheets (FCL). The space between is filled with sound-absorbing material of GCR. The designs of the wooden frame consists of upper and lower trim, which is mounted between vertical supports. Between racks have cross bars that give the frame more rigid. They have either the same level, or stepped (For example, to mount paintings, lamps, etc.).

Door unit is located flush with the inner or outer surfaces of the structure. If the room has no windows, then arranged in the partition above the door or additional window, make the room brighter. The work should be performed as follows. Initially produce a measurement of space and layout. Careful planning and precise measurement of space largely determines the success of the work. The partition can be mounted "place" or "on the floor." All Ads YandeksDirekt Advertise Tension ceilings by proizvoditelyRossiya-Germany-France (seamless). 3 days! Cheaper is not found !!!!! marti-com.ru Moscow and Moscow region Making frame walls "in place" preferably in cases where the room has sloping walls, if you want to partition the corner, the shortage of space for pre-assembly frame on the floor. Alignment construction details, checking angles, some clarification of the size needed to constantly in the process of partitioning device.

The only way to accurately and precisely adjust to each other and details nodes of the framework. At first floor bar is attached to the waist, which should adhere to the plinth. If the construction of walls will be angled, set rack adjacent to the walls. After this, measure the distance to future construction of the angle to determine the length of the bars of the waist.