Domestic Metal

Such devices are increasingly used by both private entrepreneurs and serving a wide range of specialized customer sites. For rapid calculation and manufacturing of molds, dies, models only need to send e-mail to a three-dimensional image of the product. Further details can be found at Robotics expert , an internet resource. A significant reduction in the cost of computer systems and CNC served impetus for using them in a more simple low-cost class of equipment. There was a whole class of relatively public equipment, which allows drawing with details on a computer with a CNC router finished mold in a metal or Styrofoam model, when the program is a production of "itself has taken into account" the casting shrinkage, as well as allowances for casting and machining. Of polystyrene foam model of the mold by LGM-cast aluminum process mold, and then, if necessary, bring it to the desired surface finish on the same CNC machines. This simplifies the entire technology transfer products from the drawing to penomodeli and casting speeds obtaining molds (up to several hours) to produce models from the design stage to manufacture them at the same time demanding of computer literacy and staff development. According to the principle of the CNC system servo system is a closed-loop position signal is fed from the optical sensor (encoder), which is fixed to the motor controller and provides information about the real rotation of the motor shaft. This information is used for permanent correction of deviations between the value of the specified and actual movement.

To receive bulk copies of the parts without drawing in those machines used to scan a digital recording information. The machine via the USB port with an ordinary personal computer in Windows, using a modem can function remote access to machines, including diagnostics and software upgrade software. On the Ukrainian market are the most common machines company Obrusn (Poland), ten models for the bulk processing of nonferrous metals and alloys, polymers, wood, with a positioning accuracy of 0.05 to 0.1 mm, resolution ability of NC 0.01 mm and weighing machines from 60 to 1,450 kg, as well as larger machines the company Bermaq (Spain) with a positioning accuracy of 0.03 mm, repeatability 0.015 mm position and weight of 1.5 – 3 tons of this technology are quite knowledge-intensive high- Technology foundry and related industries, they are contrary to the stereotype suggests that high technology – is not necessarily complicated processes inaccessible. Domestic Metal engineering and they will be increasingly interested in the strengthening trend from shallow processing and export semi-finished products and raw materials to produce high-tech products, which is especially beneficial for Ukraine, which belongs to the few countries with a closed-cycle metallurgical production of metals from ores of their own. Contact for questions and suggestions at:, Doroshenko, V., FTIMS NASU.